MM2008 Legionella Thermometer - Senze-Instruments Benelux

Senze-Instruments BENELUX
Go to content
Process & Quality Control

MM2008 Legionella Thermometer

Laboratory Product > Legionella Thermometer
Legionella control
Description
MM2008 Single input Thermometer with an integral 1 minute & 2 minute timer.
This Thermometer is primarily developed for use in Legionella risk management and offers reassurance that the correct temperature is taken when monitoring hot and cold water temperatures.

Calibration Certificate on request, but your metrological service can perform it too.
To test the calibration of your thermometer yourself, prepare a solution of ice and water, and insert your probe into it.
Your thermometer should read 0°C.
If it is out of calibration, firstly try using a different probe, just in case it is your probe that is faulty, and if that doesn’t make a difference.
Contact us for advice – you may need to send your thermometer back for a repair/calibration.

Ref. 115-MM2008
Features
• Single Input Thermocouple
• Integral Timer for 1 and 2 minute countdown
• Measurement Range: -200 to +1,372°C (probe type dependant)
• Accuracy: - ± 0.1% of Reading ± 0.2°C
• C°/F° Selectable
• IP67 Waterproof Casing
• Low Battery Indication
• Selectable Thermocouple Types: K & T
• Self-Calibrating
• Rubber Boot included for extra protection against damage
• Includes 1 x PP3 Battery

Requires: A Thermocouple Probe/Sensor

Kit for legionella prevention
Description : kit for legionella prevention

CLEGK2 - MM2008 Handheld Digital Thermometer with Integral Timer and KS01-S Dual Surface/Immersion Probe.
An ideal kit for water temperature testing to aid legionella prevention.


Contents
MM2008 – Legionella Thermometer with Integral Water Temperature Timer
KS01-S – K Type Dual Probe
1 x PP3 Battery

Note: This probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces.
If used on an uneven surface, there is a risk that the band will be weakened and deformed.

Ref 115-CLEGK2
Features

Handheld
• Integral Timer for 1 and 2 minute countdown
• Measurement Range: -200 to 1,372°C (probe dependant)
• Single Input Thermocouple
• High Accuracy +/-0.1% of Reading +/-0.2°C
• IP67 waterproof casing
• C/F Selectable
• Selectable Thermocouple Types: K & T
• Low Battery Indication
• Self-Calibrating
• Rubber Boot included for extra protection against damage
• Thermometer can be used with other 2-pin K or T Type Thermocouple Probes
Features

Probe
• K Type Thermocouple Class I (±1.5°C ±0.25%)
• Measurement Range: -50 to + 80°C
• Measures 110 x 10mm
• Dual Purpose for liquid and surface temperature measurement
• Ribbon band sensor sealed with Silicon Rubber compound to ensure the probe is fully waterproof.
• Cable Length is 2m of curly polyurethane with moulded connector

Note: This probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces.
If used on an uneven surface, there is a risk that the band will be weakened and deformed.
SHOWER PROBE
Description

KM08 probe for testing shower water temperatures.
The integral Cup is designed to be held directly under the water stream for an accurate temperature reading whilst the length of the stem ensures the user is kept dry

Ref. 115-KM08

Features
• Thermocouple Type - K
• Accuracy - Class I (±1.5°C ±0.25%)
• Measurement Range -200 to 1100°C
• Stem Length - 300mm
• Stem diameter - 3mm
• Integral cup diameter - 38.1mm
• Cable Length - 2 meters
• Plug Type - Moulded 2 pin
• a robust, entirely waterproof design for Legionella Water Monitoring.
Back to content