Test Specimens for Adhesive Tape Tests - Senze-Instruments Benelux

Senze-Instruments BENELUX
Go to content
Process & Quality Control

Test Specimens for Adhesive Tape Tests

Laboratory Product > Test Specimens
Test specimens for adhesive tape tests

Plastic test specimens
  • Injection molding test specimens,
    150 x 50 mm, 200 x 50 mm
  • With polished class-A finish
  • With structured surface, brushed similar to the A.F.E.R.A standard 4001
  • Grained with various degrees of surface roughness
  • Various plastics, 200 x 50 mm (for tests according to the FINAT standard)

 
Glass test specimens
  • 200 x 50 mm x 3 mm

Stainless steel test specimens
  • With defined surface roughness
    (according to old A.F.E.R.A. standard 4001)
  • With high-gloss finish
    (according to FINAT, PSTC standard, A.F.E.R.A. standard 5001, EN 1939)
  • Specimens with drilled holes and cut lines for SAFT test
We deliver exactly what you need

For our adhesive tape test specimens, we likewise leave no stone unturned. We produce the  test specimen of your choice from any standard material.

Upon request we can also provide drilled holes and cut lines, customize the test specimens and label  them with serial numbers.
Back to content