Temp 101Data Logger - Senze-Instruments avec AFFRI

Go to content
Process & Quality Control

Temp 101Data Logger

Temperature - Climatic conditions > T° Monitoring > Rtd
Temp101A Data Logger
Temperature Data Logger with a 10 year battery life

The Temp101A is second to none in the compact, portable and low cost  data logger class. This device can measure and record ambient  temperature from -40 °C to 80 °C and is approximately the size of a  matchbox which allows for easy placement even in tight spaces.

The Temp101A features a pushbutton start/stop on the device or can be  configured to start and stop using the MadgeTech Data Logger Software,  with the ability to schedule a delayed start up to eighteen months in  advance. These features combined with the ability to store up to  2,000,000 readings makes the Temp101A the ideal solution for long term  temperature deployment and monitoring cycles.

Some common applications for the Temp101A include but are not limited  to cold chain and shipping applications, warehouse and facility  mapping, HVAC or refrigerator and freezer monitoring.

• Cold Chain
• Refrigerator and Freezer Monitoring
• Vaccine Monitoring
• Warehouse Mapping
• General Purpose Temperature Recording
Temperature Sensor: Precision RTD Element
Temperature Range: -40 °C to +80 °C (
Temperature Resolution: 0.01 °C
Calibrated Accuracy: ±0.5 °C  
Reading Rate: 1 reading every second up to 1 reading every 24 hours
• 2,000,000 readings; software configurable memory wrap
• 660,000 readings in multiple start/stop mode
Wrap Around: Yes
Start Modes:
• Immediate start
• Delay start up to 18 months
• Multiple pushbutton start/stop
Stop Modes:
• Manual through software
• Timed (specific date and time)
Multiple Start/Stop Mode: Start and stop the device multiple times without having to download data or communicate with a PC
Multiple Start/Stop Mode Activation:
To start the device:
Press and hold the pushbutton for 5 seconds, the green LED will flash during this time. The device has started logging.
To stop the device:
Press and hold the pushbutton for 5 seconds, the red LED will flash during this time. The device has stopped logging.
Real Time Recording: The device may be used with PC to monitor and record data in real time
Alarm: Programmable high and low limits; alarm is activated when temperature reaches or exceeds set limits
LED Functionality:
Green LED blinks:
• 10 second rate to indicate logging
• 15 second rate to indicate delay start mode
Red LED blinks:
• 10 second rate to indicate low battery and/or full memory
• 1 second rate to indicate an alarm condition
Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password.
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device
Battery Type: 3.6V lithium battery included; user replaceable
Battery Life: 10 years typical at a 15 minute reading rate
Data Format: Date and time stamped ºC, ºF, K, ºR
Time Accuracy: ±1 minute/month (at 20 ºC, stand alone data logging)
Computer Interface: USB (interface cable required); 115,200 baud
Software: Version 2.06.3 or higher/XP SP3/Vista/Windows 7/Windows 8
Operating Environment: -40 ºC to +80 ºC, 0 %RH to 95 %RH non-condensing
Dimensions: 36 mm x 56 mm x 16 mm
Weight: 24 g
Materials: ABS Plastic
Approvals: CE
Physical Test & Measurement Equipment
Back to content