Simulation Chamber - Senze-Instruments Benelux

Senze-Instruments BENELUX
Go to content
Process & Quality Control

Simulation Chamber

Coatings & Industry > Corrosion + Ageing > Climatic Chamber
High quality material test chamber made in Italy
Testing complex temperature profiles meant for environmental simulation would require the best possible performance and precision as well. With temperature ranges of around -25 °C and +70 °C to around 180 °C, a testing chamber would be quite helpful in fulfilling all these requirements.
Having identical testing conditions in chamber interiors would be achievable regardless of the number of samples and sample size. All material testing chambers by Italian manufacturer F.lli Della Marca provide a generous range of standard testing equipment. Material test chamber systems by FDM also offer heated viewing windows with LED illuminations. Standard casters also let units to become mobile.
High-quality material test chamber made in Italy
Contrasting to the testing chambers, e.g. – For material climatic chamber the temperature would be the primary focus on testing chambers. For a reason, testing chambers are also meant for heating and drying chambers while they are tasked with adequate storage and drying of some products at temperatures of around 5 C above the ambient temperature to become 300 C with either forced convection or gravity. Furthermore, testing chambers with different program functions and forced convections.
Concrete testing
Hard materials like concrete and cement require a list of individual tests for conducting their quality and integrity as well. The chamber series meant for concrete testing works on imported carbon dioxide sensors and the sensor also require usage of infrared principle detection.
Measurements in concrete test chamber are conducted through highly advanced digital measurements
Long term life operation is present with higher precision.
The electronic concrete and cement testing machines designed by FDM are required to cure and make hydraulic concrete, and cement testing specimens are remaining equipped with submerged and dry storage as well. The large workspace has an ideal humidity range of about 0% to 98% R.H. and temperature ranging from 15.6 C to 37.8 C for a proper determination of material quality.
Stress testing methods
FDM series specially meant for stress testing has determined the withstanding properties of materials in the extremes. A full cross-section amount would be ideal for a material stress test with a few parameters in addition to five to seven replicates for obtaining complete data.
Testing conditions are beyond normal operational capacity, and these are often carried out to the breaking point for observation of the outcomes.
Humidity and temperature testing
For plastic and PCBA, multi-hole products and materials have significant effects on humidity and temperature. Effects from the temperature humidity material test would be like product overheating, plastic deformation, poor cold start, etc. Therefore environment material test chambers; is available in different models for absolute humidity and temperature testing materials.
Material testing is stressful not only for the specimens. When is required to satisfy standards as for example:
EN 196-1 EN 1324 ASTM 2247-11
EN 1367-1 EN 12004 ASTM C581-03
EN 12390-2 EN 1348 ASTM D 2247-11
EN 12371 EN1346 ASTM E 104-02
EN 13383-2 EN 1308 JUS.U.M1.016
EN 1367-6 EN 12002 JUS.U.M1.055
CEN/TS 772-22:2006 EN 1344:2013
you can be stressed too. Don’t worry about that, just relax and push the button!
Choose the standard you need to run on your climate chamber with the easiness of a touch screen, that’s all.
You need more test standards? Program it by yourself or ask us to do it for you.
We’ll send you an USB key with the software updates.
Tell us if you have special requirements about standards, run steps and temperature/humidity cycles.
Back to content