Dip Viscosity Cups - Senze-Instruments

R & D
Production
Workshop
Senze-Instruments
Quality Control
Laboratory
Metrology
Calibration
Lubrication
Go to content
Graphic & Printing Industry > Ink properties > Viscosity

FLOW CUP WITH HANDLE (FRIKMAR TYPE)
Thanks to its handle, this cup is very easy to use and performs quick controls in workshop or during manufacturing processes.
The instrument is first dipped into the product to be measured
then emptied through the orifice. The flow time can be converted into cSt.
Several models, from 6 to 2000 cSt.


ASTM - DIN - EN - ISO - NF

Purpose and Application
Rapid determination of the viscosity of any type of fluid, as for instance paint, varnish, wet enamel, photogravure ink, dye and lacquer for leather, oil, fat, foodstuff etc. Particularly suit-able in the workshop.
Measuring Principle
The viscosity of a substance to be determined is
expressed as the efflux time of the measured volume (100 ml) out of a cup through an orifice of specified diameter. The efflux time is measured with a stop-watch.

Visco Test Blade Model 301 acc. to Rossmann
Viscosity
Ord.-No. : 101-0021.02.31

Simple consistency test.
The Visco Test Blade is designed for the rapid determination of the viscosity of paints for spray and brush application. On the one hand it is a practical stirring utensil when adding thinner to the paint and, on the other hand, it serves as a device to measure the viscosity of the substance. It is easy to use and to clean, making it a convenient instrument for use in the practice.
The Visco Test Blade is immersed into the test liquid in such a way that the slit is entirely covered, whilst the upper hole remains free. The blade is then lifted quickly out of the liquid, holding it upright, and the time measured until the fluid meniscus in the slit reaches the lower hole. This point is clearly visible since the membrane covering the hole will burst at that moment. The run-off speed in the slit is also influenced by the run-off speed on the remainder of the blade. The immersion depth should therefore be adhered to exactly. Properly wetted the blade prior to the test.
Add
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Viscosity
Ord.-No. : 101-0062.01.31
Nozzle Dia. : 2 mm
Viscosity Range : 10 - 50 mm²/s
Material : Aluminium alloy

Add
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Viscosity
Ord.-No. : 101-0062.05.31
Nozzle Dia. : 3 mm
Viscosity Range : 30 - 300 mm²/s
Material : Aluminium alloy

Add
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Viscosity
Ord.-No. : 101-0062.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 50 - 800 mm²/s
Material : Aluminium alloy
Add
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Viscosity
Ord.-No. : 101-0062.03.31
Nozzle Dia. : 6 mm
Viscosity Range : 300 - 1,500 mm²/s
Material : Aluminium alloy
Add
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Viscosity
Ord.-No. : 101-0165.01.31
Nozzle Dia. : 3 mm
Viscosity Range : 10 - 40 mm²/s
Material : Aluminium alloy
Add
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Viscosity
Ord.-No. : 101-0165.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 35 - 135 mm²/s
Material : Aluminium alloy
Add
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Viscosity
Ord.-No. : 101-0165.03.31
Nozzle Dia. : 5 mm
Viscosity Range : 90 - 330 mm²/s
Material : Aluminium alloy
Add
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Viscosity
Ord.-No. : 101-0165.04.31
Nozzle Dia. : 6 mm
Viscosity Range : 190 - 680 mm²/s
Material : Aluminium alloy

Add
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Viscosity
Ord.-No. : 101-0049.01.32
Nozzle Dia. : No. 1 (0.078")
Viscosity Range : 5 - 60 mm²/s
Material : Aluminium alloy

Add
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Viscosity
Ord.-No. : 101-0049.02.32
Nozzle Dia. : No. 2 (0.108")
Viscosity Range : 20 - 250 mm²/s
Material : Aluminium alloy

Add
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Viscosity
Ord.-No. : 101-0049.03.32
Nozzle Dia. : No. 3 (0.148")
Viscosity Range : 100 - 800 mm²/s
Material : Aluminium alloy

Add
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Viscosity
Ord.-No. : 101-0049.04.32
Nozzle Dia. : No. 4 (0.168")
Viscosity Range : 200 - 1,200 mm²/s
Material : Aluminium alloy

Add
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Viscosity
Ord.-No. : 101-0049.05.32
Nozzle Dia. : No. 5 (0.207")
Viscosity Range : 400 - 1,800 mm²/s
Material : Aluminium alloy

Add
Zahn Flow Cup complete set of 5 cups
Viscosity
Ord.-No. :101-0030.01.31
complete with 5 exchangeable cups of orifice diameter No. 1 (0.078"), No. 2 (0.108"), No. 3 (0.148"), No. 4 (0.168") and No. 5 (0.207"), including carrying case

Add
Back to content | Back to main menu